3560x Software recovery

[davidhayes2]

Hi All

Having made a school boy error by uploading the wrong IOS I've managed to get into the Recovery prompt = switch:.

Problem / issue is with that the copy command is unrecognised, so copying new correct IOS is proving impossible, all I would like to do is get the switch booting from the origninal image.

Is there anyone out there that can help?

Thanks

[Charles Hill]

Hi David,

If the original ios is still in flash, try
boot flash:/"original IOS"

If not take a look at the link below, which provides steps for copying ios in Rommon mode.

Recovering from a Software failure,
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/configuration/guide/3750x_cg.pdf

Hope this helps,

Please rate helpful posts.

Thanks.

[rosaho]

This discussion has been reposted to the LAN, Switching and Routing community.