06-26-2022 11:39 PM
Hi all,
Very basic question but essential for me (since I don't have the hardware in front of me).
Can someone tell the interface numbering on a 3560-24TS (the copper ports).
The front panel doesn't give me any clue whether the interface n°0 is the up or the bottom interface
There is a indication "01X" but I'm not 100% sure if the n°0 should be the top one.
Thanks!
Solved! Go to Solution.
06-27-2022 12:16 AM
you can see numbering at below raw of ports. eg. '01X' means port number 1. its near '^' light. that means 1st port is top row 1st port. then next light indicate second port. it marked towards down. so second port is port below the 1st port.
1 3 5
2 4 6 etc.
this is the numbering patern
06-27-2022 12:12 AM
The cisco switches are numbert
1 3 5 7 9 11
2 4 6 8 10 12
This is a guide for the installation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3560/hardware/installation/guide/3560hig.pdf
06-27-2022 12:16 AM
you can see numbering at below raw of ports. eg. '01X' means port number 1. its near '^' light. that means 1st port is top row 1st port. then next light indicate second port. it marked towards down. so second port is port below the 1st port.
1 3 5
2 4 6 etc.
this is the numbering patern
06-27-2022 12:34 AM
Hi Kasun and Jaton,
Thanks for your replies!
Bye
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: