3650 memory leak and cpu core 1,3 99% problem

[wkrxndwkd]

hello

The following log occurs on the 3650 switch.

%PLATFORM-3-ELEMENT_CRITICAL:Switch 1 R0/0: smand: 1/RP/0: Used Memory value 96% exceeds critical level 95%

%PLATFORM-3-ELEMENT_CRITICAL:Switch 1 R0/0: smand: 1/RP/0: Used Memory value 96% exceeds critical level 95%

This appears to be the same bug as https://bst.cisco.com/bugsearch/bug/CSCvd45973?rfs=qvlogin.

However, apart from the memory leak, the cpu utilization output is as follows:
The upper half of each core is different. Could this be seen as a problem phenomenon? Could this have something to do with the memory leak?

Occasionally Core 0 will spike above 8-90%.

Please help.

thank you
Switch#show processes cpu
Core 0: CPU utilization for five seconds: 19%; one minute: 33%; five minutes: 42%
Core 1: CPU utilization for five seconds: 99%; one minute: 86%; five minutes: 68%
Core 2: CPU utilization for five seconds: 79%; one minute: 79%; five minutes: 92%
Core 3: CPU utilization for five seconds: 99%; one minute: 99%; five minutes: 94%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process

[Leo Laohoo]

Post the complete output to the following commands: 

sh version
sh platform resources
sh platform software status conn brief
sh process cpu sort location switch active r0

[wkrxndwkd]

Thanks for your reply.

Your requested information will be available on February 12th.

Could you please wait a little bit?

Thank you

[Leo Laohoo]

---

@wkrxndwkd wrote:

Thanks for your reply.

Your requested information will be available on February 12th.

Could you please wait a little bit?

Thank you

---

Is that 12 February 2025?  

[wkrxndwkd]

ah..sorry i was mistaken

next week 3.12..

haha