03-06-2024 10:59 PM
hello
The following log occurs on the 3650 switch.
%PLATFORM-3-ELEMENT_CRITICAL:Switch 1 R0/0: smand: 1/RP/0: Used Memory value 96% exceeds critical level 95%
%PLATFORM-3-ELEMENT_CRITICAL:Switch 1 R0/0: smand: 1/RP/0: Used Memory value 96% exceeds critical level 95%
This appears to be the same bug as https://bst.cisco.com/bugsearch/bug/CSCvd45973?rfs=qvlogin.
However, apart from the memory leak, the cpu utilization output is as follows:
The upper half of each core is different. Could this be seen as a problem phenomenon? Could this have something to do with the memory leak?
Occasionally Core 0 will spike above 8-90%.
Please help.
thank you
Switch#show processes cpu
Core 0: CPU utilization for five seconds: 19%; one minute: 33%; five minutes: 42%
Core 1: CPU utilization for five seconds: 99%; one minute: 86%; five minutes: 68%
Core 2: CPU utilization for five seconds: 79%; one minute: 79%; five minutes: 92%
Core 3: CPU utilization for five seconds: 99%; one minute: 99%; five minutes: 94%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
03-06-2024 11:19 PM
Post the complete output to the following commands:
sh version
sh platform resources
sh platform software status conn brief
sh process cpu sort location switch active r0
03-07-2024 08:28 PM
Thanks for your reply.
Your requested information will be available on February 12th.
Could you please wait a little bit?
Thank you
03-07-2024 09:26 PM
@wkrxndwkd wrote:
Thanks for your reply.
Your requested information will be available on February 12th.
Could you please wait a little bit?
Thank you
Is that 12 February 2025?
03-07-2024 09:32 PM - edited 03-07-2024 09:34 PM
ah..sorry i was mistaken
next week 3.12..
haha
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide