06-09-2018 01:27 PM - edited 03-08-2019 03:19 PM
Hi everyone, I'm having trouble loading 16.3.5b software on two separate 3650 stacks in my network.
SWITCH#$stall file flash:cat3k_caa-universalk9.16.03.05b.SPA.bin new force
Preparing install operation ...
[2]: Copying software from active switch 2 to switches 1,3,4,5
[2]: Finished copying software to switches 1,3,4,5
[1 2 3 4 5]: Starting install operation
[1]: % Non-existent process 4925 abandoned the ISSU lock. Operation aborted.
[3]: % Non-existent process 13552 abandoned the ISSU lock. Operation aborted.
When I search this error message I can't find anything. Any ideas how to fix this?
06-09-2018 02:10 PM
Hi,
Does each switch flash have enough space for the new image?
Also, can you first manually copy the new IOS from tftp or USB to the flash and then run the install command?
HTH
06-09-2018 02:15 PM
Yes each switch has enough space. I think I ran the install command as you can see in my post. The word install gets cut off though. It's installing from the flash, which I copied over via FTP
06-09-2018 02:25 PM
Is the stack in install mode or bundle mode?
sh ver will show you that.
HTH
06-09-2018 02:27 PM
Both in install mode
06-09-2018 02:35 PM
Can you try the same command without the "new force" addition?
06-09-2018 02:42 PM - edited 06-09-2018 02:42 PM
I can try, but what is the difference? I'm following the 16.5.3 release notes which specify to add these keywords. I was able to upgrade other 3650 stacks this way, just not these two which are giving me errors.
06-09-2018 04:38 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide