11-08-2011 09:48 AM - edited 03-07-2019 03:16 AM
Hello, I am trying to configure a 3750 48 port switch and having trouble with getting it to see the sfp. I just want to set up the router with a pretty basic set up since I am using it for a ping test between 2 buildings, via fiber. Could anyone please let me know how I can enable the sfp port? I would greatly appreciate it! Thanks!
Sent from Cisco Technical Support iPhone App
11-08-2011 02:14 PM
Michael Hepler wrote:
Hello, I am trying to configure a 3750 48 port switch and having trouble with getting it to see the sfp. I just want to set up the router with a pretty basic set up since I am using it for a ping test between 2 buildings, via fiber. Could anyone please let me know how I can enable the sfp port? I would greatly appreciate it! Thanks!
Sent from Cisco Technical Support iPhone App
What modules do you have in the switches, and what SFP's are you using?
Can you post the output of the "show inventory' command? Also the output of "show int
Cheers.
11-08-2011 03:24 PM
If your SFP is Single Mode, you need to use SM fiber. If your SFP is MM then you need to use MM fiber
HTH
11-10-2011 12:01 PM
Thanks for the ideas guys, it turns out my SFP was faulty. I ended up locating another one and everything seems to be working. Thanks again!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide