10-11-2007 01:06 AM - edited 03-05-2019 07:01 PM
Hi all,
I have 2 x 3750 stack together and the ios version of them is 12.2(25)SE. I am going to upgrade the IOS. I have upload the IOS to the switch's flash, but I don't know how to make the 3750 load the new IOS after reload. I have checked the link http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00804799d7.shtml#mupgrade
but the command "load system switch all <path>" seems not included in my 3750 existing IOS. Please help!!!
Andy
10-11-2007 05:16 AM
I dont know if you made a typo or what but the correct command is "boot system" not "load system".
10-11-2007 05:59 PM
It is just the typo error I have made in converstaion message. The command I tried is just like you mentioned "boot system switch all
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide