06-23-2021 01:17 AM
Hi there, I am an end user and not a network engineer.
I have eight 3750-X network switches that are not used for anything fancy other than Netflow export (was is CRITICAL).
I need to budget to upgrade these switches and am looking for advice on which switches to upgrade to.
Many thanks, Neil
Solved! Go to Solution.
06-23-2021 03:15 AM
The "smallest" Cisco Catalyst that supports NetFlow is the 9200.
06-23-2021 03:25 AM - edited 06-23-2021 03:27 AM
You want to uplift the switch model from exiting model to new Models.
Cisco 3750(all models)EoL
New Trends is Cat 9K ( depends on budge you can choose) Cat 9200 Cat 9300 good to access switches replacement of Cat 3750.
Netflow support has that models
Hope this make sense ?
06-23-2021 02:35 AM
Have a look at IOS Upgrade on Catalyst Switches - Easy as Pi.
06-23-2021 02:57 AM
Hi Leo, many thanks but i am not looking to upgrade the IOS I am looking to upgrade or perhaps should have said replace the switch with a modern version that is netflow capable.
06-23-2021 03:15 AM
The "smallest" Cisco Catalyst that supports NetFlow is the 9200.
06-23-2021 03:25 AM - edited 06-23-2021 03:27 AM
You want to uplift the switch model from exiting model to new Models.
Cisco 3750(all models)EoL
New Trends is Cat 9K ( depends on budge you can choose) Cat 9200 Cat 9300 good to access switches replacement of Cat 3750.
Netflow support has that models
Hope this make sense ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: