cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

23112
Views
115
Helpful
23
Replies
Beginner

3750x Stack is repeatedly showing error " %ADJ-3-RESOLVE_REQ : Adj resolve request: Failed to resolve <IP Address> <vlan ID>..

Good Morning,

I have a 3750x stack running  15.0(2)SE6.

Today I started seeing some weird problems in the logs

" %ADJ-3-RESOLVE_REQ : Adj resolve request: Failed to resolve <IP Address> <vlan ID>..

To my knowledge no changes have been made except updating the NTP and Timezone settings of the switch.

The problems is that before I rebooted a vmWare - Host all communication with said host worked like a champ. After reboot of said host, the only communications that work are from the host outward. Anyone have any ideas?  I would love to reboot, but as this is production hours that is not an option.

Everyone's tags (1)
23 REPLIES 23
Cisco Employee

Hello, check this bug

Hello,

 

check this bug 

CSCug43307

 

Beginner

Hi Mtarawne. Do you suggest

Hi Mtarawne. Do you suggest to install newer version of IOS, f.e. 15.4.... ?

regards

Beginner

Hi

Hi

In a Stack  3850 

repeatedly showing error  %ADJ-5-RESOLVE_REQ_FAIL: Adj resolve request failed for x.x.x.x

Base Ethernet MAC Address : f8:a5:c5:06:76:00
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FOC20484XUZ
Model Revision Number : AB0
Motherboard Revision Number : A0
Model Number : WS-C3850-48P
System Serial Number : FOC2048U14U


Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48P 03.07.03E cat3k_caa-universalk9 INSTALL
2 56 WS-C3850-48P 03.07.03E cat3k_caa-universalk9 INSTALL

Beginner

Seems that if your logged in

Seems that if your logged in you can't search this bug. If you google it while your logged out google will come up with a hit and you can read the bug.

The the text under conditions does not make any sense to me. Nobody wants to see a log message every time the device needs to resolve an arp entry. You shouldn't have to disable something the makes the switch perform better just to avoid filling up the log with garbage.

The message interpreter tells you

Explanation    An internal software error occurred.

The details tell you to open a tac case.

Bottom line is..Will it be fixed, and in what code level will it be fixed.

 

If we are talking about 15.0

If we are talking about 15.0(2)SE6 on 3750x you should try "no ip cef optimize neighbor resolution" - that should do the trick. (this option was disabled by default on 12.2 train, but enabled by default on 15.0) The other way is to try to hunt down all arp "incomplete" entries and check the issues with them - that would solve the problem with messages too.

Beginner

Hello Tomasz,i have the same

Hello Tomasz,

i have the same problem on a 3750X Stack with 15.0(2)SE6.
This command solve the problem for me at the moment,

thanks, great post

Regards,
Niels

Enthusiast

Ran in this issue too after

Ran in this issue too after upgrading WS-C3750X-48P to c3750e-universalk9-mz.152-2.E4

no ip cef optimize neighbor resolution fixed the problem for me as well.

Beginner

Tomaszu dobra robota ;)I don

Tomaszu dobra robota ;)

I don't have this problem anymore, the command completely solves the problem,  thank you Tomasz.

Best Regards
Witold

Beginner

Same problem here on a 3650G

Same problem here on a 3560G with same software version - 15.0(2)SE6

no ip cef optimize neighbor resolution fixed the problem for me as well.

Thanks!

Beginner

Thanks! had a 3750X stack

Thanks! had a 3750X stack running 15.0(2)SE6 and the command stopped the logs.

Beginner

Thank you Tomasz,! have a

Thank you Tomasz,

! have a 3750X stack running 15.0(2)SE6 and the command stopped the logs :-)

IOS Release: c3750e-universalk9-mz.150-2.SE6

SKU's:

Unit#1 WS-C3750X-12S-S

Unit#2 WS-C3750X-12S-S

Unit#3 WS-C3750X-24T-S

Unit#4 WS-C3750X-24T-S

Keep up the awesome work.

 

Thank very much for this post

Thank very much for this post, I have tried and so far so good

 

I upgraded from 12.2 to 15.0(2)SE7 and I was seeing this log a lot... so default behaviour makes all sense to me :)

 

Best regards,

Beginner

This was the direction I

This was the direction I received from TAC after we experienced the same issue when moving to 15.0(2)SE6.

"no ip cef optimize neighbor resolution" 

 

Beginner

This works for me too.

This works for me too.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards