cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
621
Views
5
Helpful
3
Replies

3850 03.07.05 radiu-server host - Command

islamsallaj
Level 4
Level 4

I currently have a 3850-12X48U switch running 03.07.05E code...

 

trying to configure radius-server host command for ISE deployment and getting unknown command 

 

radius-server host xx.xxx.xxx.xxx auth-port 1812 acct-port 1813

radius-server host xx.xxx.xxx.xxx auth-port 1812 acct-port 1813

 

Getting error at host...

 

what is the equivalent command in 03.07.05E code?

 

thank you in advance 

 

izzy

3 Replies 3

Mark Malone
VIP Alumni
VIP Alumni
Hi
from doc
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_rad/configuration/xe-3se/3850/sec-usr-rad-xe-3se-3850-book/sec-cfg-radius.html

Note

The radius-server host command is deprecated from Cisco IOS Release 15.4(2)S. To configure an IPv4 or IPv6 RADIUS server, use the radius server name command. For more information about the radius server command, see Cisco IOS Security Command Reference: Commands M to R.
SUMMARY STEPS

1. enable

2. configure terminal

3. radius-server vsa send [accounting | authentication]

4. radius server server-name

5. address ipv4 ip-address

6. non-standard

7. key {0 string | 7 string | string}

8. exit

Deepak Kumar
VIP Alumni
VIP Alumni

Radius Server commands have changed. Please configure as

 

radius server Radius <Group Name>
address ipv4 x.x.x.x.x auth-port 1645 acct-port 1646
key x.x.x.x.
timeout 2
retransmit 3

 

Regards,

Deepak Kumar

Regards,
Deepak Kumar,
Don't forget to vote and accept the solution if this comment will help you!

thank you this is great information

Review Cisco Networking for a $25 gift card