05-10-2023 03:46 PM
Want to connect a UCS-FI-6332 40G port to 4x10g 2208 FEX in chassis.
40G QSFP+ to 4x10G SFP+ Breakout from Cisco UCS FI "40g port" to 4x10g SFP's at FEX/Chassis.
Is this supported? Could be configured as a single port port-channel from FI to FEX?
Solved! Go to Solution.
05-10-2023 08:15 PM
Does not seem that 2208 supports 40Gig. Have a look:
https://tmgmatrix.cisco.com/?npf=14&npid=912
HTH
05-10-2023 08:15 PM
Does not seem that 2208 supports 40Gig. Have a look:
https://tmgmatrix.cisco.com/?npf=14&npid=912
HTH
05-12-2023 07:26 AM
Might try in the lab and see if this works, even if surely not supported. Will post if it works.
05-12-2023 07:29 AM
Might try in the lab and see if this works, even if surely not supported. Will post if it works.
That would be very helpful to others. Good Luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide