4506-e give me WS-X4624-SFP-E not supported

[mohammad saeed]

Hi Guys

I have core switch 4506-e with show ver

Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASE-M), Versio

n 12.2(40)SG, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 07-Nov-07 19:52 by prod_rel_team

Image text-base: 0x10000000, data-base: 0x11C44138

ROM: 12.2(44r)SG

Darkside Revision 4, Jawa Revision 18, Tatooine Revision 140, Forerunner Revisio

n 1.71

ALianz-CSW uptime is 1 year, 23 weeks, 5 days, 12 hours, 53 minutes

System returned to ROM by power-on

System image file is "bootflash:cat4500e-ipbase-mz.122-40.SG.bin"

cisco WS-C4506-E (MPC8548) processor (revision 6) with 524288K bytes of memory.

Processor board ID FOX1204GFRC

MPC8548 CPU at 1.33GHz, Supervisor 6-E

Last reset from PowerUp

11 Virtual Ethernet interfaces

40 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

511K bytes of non-volatile configuration memory.

And i installed line card  WS-X4624-SFP-E gave me not supported? What is the issue here?

Thanks

[marce1000 · Accepted solution]

Ref : https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/catalyst-4500-series-line-cards/product_data_sheet0900aecd802109ea.html

 Lookup the card; it seems that your software version is too low :

WS-X4624-SFP-E:

●   24-port line-rate SFP line card, providing 24 gigabits per-slot capacity (1:1 oversubscribed)

●   Cisco IOS Software Release 12.2(44)SG or later

●   L2-4 Jumbo Frame support (up to 9216 bytes)

●   Inherits Supervisor Engine QoS capability

●   Compatible only with E-Series supervisor engines

●   Enterprise, mid-market, and commercial core and distribution deployments requiring line-rate capability

●   Service provider: GE aggregation for DSLAM/PON/mobile data backhaul

[mohammad saeed]

Could this solve the issue cat4500-ipbase-mz.122-46.SG1.bin ?

[Ben Samayoa]

Hi,
According to Cisco most certainly will. Give it a shot.
regards,

Ben.

[mohammad saeed]

Yeah I hope that I am going to do it today...could you recommend me a steps to upgrade the ios in 4506 switch?

Thanks

[Ben Samayoa]

hi there,

I have attached a small file for you to follow as example, providing you have copied the IOS you want into bootflash of your processor.

Then all you do is change the IOS i used as an example and type/copy yours instead.

You dont need to format your bootflash, i am sure you have enough space. 

regards,

Ben

[motiar]

Hello Mohammad,

Have you got solved the problem? I have the similar problem, even with the latest version of IOS. Please let me know, how you got solved this issue. 

best regards

Motiar

[mohammad saeed]

Yes solved with the update the ios file some cards need particular updates

[motiar]

Which IOS version are you using for this card?