02-06-2007 02:38 PM - edited 03-05-2019 02:11 PM
Hello all,
I have a 4507 with a single WS-X4516 Supervisor V engine. My status LED is a constant orange. According to the documentation, an orange LED means "System boot or diagnostic test is in progress."
The switch appears to be functioning properly, and a show module 1 reports no errors. Surely this thing isn't running a diagnostic test 24 hours a day? The light never turns green. It just bugs me. Any ideas?
Thanks in advance,
Solved! Go to Solution.
02-06-2007 02:45 PM
Try a "show module" command and see if there is another module with an issue. Also a show environ power.
I used to see this on 4006 Sup II when you had a PoE chassis and the offboard PoE unit was not plugged into the 4K chassis
02-06-2007 02:45 PM
Try a "show module" command and see if there is another module with an issue. Also a show environ power.
I used to see this on 4006 Sup II when you had a PoE chassis and the offboard PoE unit was not plugged into the 4K chassis
02-06-2007 02:54 PM
Ah, thanks! Yes, I have dual power supplies, and I had one turned off for some testing I did a few days ago.
02-06-2007 02:56 PM
I'm happy it's solved
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide