6500 Error Invalid TLV ERROR: Signature not valid for file disk0

[ahmad82pkn]

Hi i was trying to upgrade 6506 Hybrid mode Core switch to complete IOS, i copied IOS from a working 6505 to TFTP, and then from TFTP copied that IOS to my newly purchased FLASH card that is in disk0 of my Hybrid 6506 Core switch,

But when i verify the Image, it gives below error, any idea how to resolve this? as i dont find this error on internet etc.

(enable) verify disk0:s72033-ipservicesk9_wan-mz.122-18.SXF17.bin

Error Invalid TLV

ERROR: Signature not valid for file disk0:s72033-ipservicesk9_wan-mz.122-18.SXF17.bin.

File disk0:s72033-ipservicesk9_wan-mz.122-18.SXF17.bin checksum verified and is Ok.

File disk0:s72033-ipservicesk9_wan-mz.122-18.SXF17.bin signature verified invalid.

[mahmoodmkl]

Hi,

u need to follwo the procedure of converting from hybrid to native.

Below is the link for it.

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008070f124.shtml

Thanks

[ahmad82pkn]

Thank you Mahmood for your reference,

i didnt care of the error above, and proceeded with the doc i early had, and was successful in the conversion

lucky day lolz.