Hi,
Have an issue with IOS upgrade. As am running IOS I do not need bootldr; so under sh boot - it says no bootldr set
Have IOS c6sup22-jk2o3sv-mz.121-27b.E4.bin" in bootflash and s222-adventerprisek9_wan-mz.122-18.SXF11.bin on disk0
Am forcing switch to boot new IOS via command boot system disk0:s222-adventerprisek9_wan-mz.122-18.SXF11.bin
So what happens - it boots to the point where it says - Changing console ownership to route processor
and then crashes ??
Have another 6500 where made it run but when you reload it - it is no booting , it gets to rommon and sits there
When you issue boot disk0: it then boots up
I do have command in config where it says boot system disk0:s222.......... but for some reason seems not working ?
Highly appreciate any help
Thanks
Arunas