Hello.
What i would like to accomplish is to limit the aggregate input bandwidth to let's say 1G, to a certain subset of vlans configured on a 6509-E. Bare in mind that this device is not doing L3 termination and thus, all ports are access ports. Below is a snippet of the configuration:
mls qos aggregate-policer TEST-AGGR-LIMIT 1000000000 31250000 31250000 conform-action transmit exceed-action drop
!
class-map match-any TEST-AGGR-LIMIT-CLASS
match vlan 1-500
match vlan 510-4094
!
!
policy-map TEST-AGGR-LIMIT-POLICY
class TEST-AGGR-LIMIT-CLASS
police aggregate TEST-AGGR-LIMIT
interface GigabitEthernetx/y
switchport
switchport access vlan 3001
switchport mode access
load-interval 30
flowcontrol send off
When this policy is applied ingress on GiX/Y (access port), i am getting Match vlan is not supported for this interface.
Every help is greatly appreciated.
Best regards.