Switching

Hi allI have 2 core switches, 1 is the stp root, the other the backup root for stp. If I have an access switch with a single link to the core which is the stp  root, if I add a second link on the access switch to the backup root, will this cause an o...

Hello,TOday we setup LINMIN (automated OS provisioning) for our server farm. We have about 350 servers, each server is on its own SEPARATE VLAN with a subnet of /29 for IP's. So every server has his own private vlan.The dedicated servers are mostly i...

Hi community,i have 10 vlans configured on cisco 6500 switch and there subnet as follows10.1.1.0/24 ( Vlan 1 i.e. Management vlan)    to10.1.10.0/24 (Vlan 10)I had created a newly vlan and it is Vlan 11 ( 192.168.5.0/24)I dont want to a newly created...

Dear Friends,We have a 6509 VSS running 12.2(33)SXI4. We got high mem usage alert from CS-MARS for that (indicating memory utilization is more than 90%). Looking at sh memory, i see that we have enough free mem (more than 60% available). However, loo...

I have a 6509 switch with CATOS , making use of this as a L2 only and L3 functionality is moved to 3550 ;I created VLANs on both the end and for management purpose only one vlan 1 interface created on 6509 MSFC and rest of the VLAN interfaces are mov...

I need some help. Ill admit im a little more then just confused when it comes to configuring cisco routers, and even though i have tried to use the CCP, its not helping. So here is what i am trying to do. I am trying to split up my network into group...

Where in Cisco documentation is how to read a small switch Front panel MODE button display on the LEDs Looking at a catalyst 2950 .I’m checking on a switch I do NOT have login access, want to just read the MODE UTIL bar graph correctly   Looking for...

Hi all,I read though the manual but couldn't see this at all but i am just wondering if the slm224g supports trunk links. So i could buy another one and have them connected together and so vlan1 on switch A will communicated have vlan1 on switch B.Ma...

Hi All,We have a special testing in switch 3750. Copy the file from switch to one desktop. If there is no connection to the desktop, the copy process will time out after about 30 seconds. Is there any way to change this value? We want to have a very ...