11-09-2012 07:11 AM - edited 03-07-2019 09:57 AM
Dears do you known because may Switch 6509 not accept this command
follow some informations
MODEL: cisco WS-C6509-E
SUP: Supervisor Engine 720
IOS: s72033-ipservicesk9_wan-mz.122-33.SXH3.bin
Could be because Model, or SUP, or IOS?
Thanks for all
11-09-2012 07:34 AM
Hello Silvio,
it is a question of IOS version you should need an advanced ip services feature set
for MPLS full features you need a sup720B or better, MPLS is not supported on sup720
Hope to help
Giuseppe
11-09-2012 07:46 AM
So I need change IOS and SUP?
Thanks
11-09-2012 07:51 AM
Hello Silvio,
yes if you have sup720 only you need to change it to support MPLS features and also the IOS image feature set.
if you have sup720B or better you need only to upgrade the IOS image
Hope to help
Giuseppe
11-09-2012 09:03 AM
Look it seens Series B correct
WS-SUP720-3BX
sh module
5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide