Question??? Catalyst 2960-S-48FPD-L & Supported SFP Modules

[datencio1]

I have five Catalyst 2960-S-48FPD-L switches and needed to know if this SFP+ module will work in it:  GLC-LH-SM.  I have the the GLC-SX-MM modules in them now, which are working.  However, I get no activity on the GLC-LH-SM modules.  I have gone over the following link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/hardware/installation/guide_stack/HIGOVERV.html#wp1250224 , and might be misunderstanding it.  I need to know if I can use them or have to return them,  any help in the matter would be appreciated.

Thnaks,

Daniel

[Arumugam Muthaiah]

Hi Daniel,

Yes, SFP module GLC-LH-SM will work with switch WS-C2960S-48FPD-L, please see the detail below,

Product:

WS-C2960S-48FPD-L

WS-C2960S-48LPD-L

WS-C2960S-24PD-L

WS-C2960S-48TD-L

WS-C2960S-24TD-L

Supported Transceiver Module

GLC-SX-MM

GLC-LH-SM

GLC-ZX-SM

GLC-BX-D

GLC-BX-U

CWDM SFP

GLC-SX-MMD

GLC-LH-SMD

Minimum IOS release: 12.2(53)SE1

Refer:

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html#wp128965

Regards,

Aru

*** Please rate if the post is useful ***