6509 & Rate-limit Command

[Stuart McGrath]

Can anyone shed any light.

How is it i can implement the command 'ip multicast rate-limit out group-list <access-list>' but i get the error "ip multicast rate-limit" command is not supported on 6509?

Is it an IOS limitation or a limitation of the switch series and subsequently can't be used at all?

[Raju Sekharan]

This is not supported on 6500.

Also Effective with Cisco IOS Release 15.0(1)M and Cisco IOS Release 12.2(33)SRE, the  ip multicast rate-limit

command is not available in Cisco IOS software.

http://www.cisco.com/en/US/docs/ios/ipmulti/command/reference/imc_03.html#wp1063665

you can use QOS alternatively

Thank you

Raju

[Stuart McGrath]

Thanks Raju