7206 E1 Module

[wasiimcisco]

Hi,

I want to purchase E1 module that are supported with plateform

Cisco 7206VXR (NPE-G2)

I have found a module PA-MCX-2TE1 and one is

PA-VXC-2TE1+ =2 port TE1 hi-capacity enhanced voice PA

Kindly tell me which module is best.

I am confuse about these module.

Waiting for reply,

thanks in Advance.

[royalblues]

It depends what you want to use the E1's for?

The PA-MCX-2TE1 is the MIX-enabled T1/E1 port adapters which provide the ability to integrate voice and data on the same T1/E1 interface without the need for an external time-division multiplexing (TDM) device.

More info here

http://www.cisco.com/en/US/products/hw/modules/ps2033/prod_bulletin09186a008007d45a.html

PA-VXC-2TE1+ are enhanced digital voice port adapters offer an end-to-end interoperable voice-over-IP (VoIP) solution

More info here

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_data_sheet09186a0080091cb2.html

HTH

Narayan