Having a strange issue here with an 7606-s chassis equipped with two sup720's, and two regular line cards. There is only one power supply, PWR-2700-AC. I recently builded this setup and powered it on last week for the first time. It ran fine for about 20 minutes while suddenly the chassis powered down.
I've checked the back of the chassis and noticed that the power supply had it's 'input ok' and 'power fail' led lit. I toggled the power switch and waited half an hour to power it on again. This time only 1 minute of joy. My first idea was the PSU due to the power fail led so I had it swapped by the supplier for another. Unfortunately, when I powered it on today, it didn't change a thing, still unexpected power downs.
..and followed the suggestion to power the chassis on without any modules in the slots. So I did that and it ran for 8 minutes only. However, the fan tray did respond properly when I removed the small thermal module in the upper right by increasing the fans to full speed.
Following above documentation, it points to the chassis (there is not much left). Now the real question comes, isn't there anything else that could be the cause of this?
Leopold Fisher, Cisco Meraki IoT specialist, will introduce you to new and innovative additions to the Meraki portfolio coming in April 2021.
Meraki Vision Session
MV smart camera range is getting big...
To participate in this event, please use the button to ask your questions
Dynamic Routing Protocols & IPv6
Have any questions on dynamic routing protocols with IPv6?
In this event we will answer all your questions related to dynamic routing pro...
The cat's out of the bag! In October 2020, Cisco announced the Next Generation of Enterprising Routing Platforms: the Catalyst 8000 Edge Platforms Family including the Catalyst 8200, Catalyst 8300, Catalyst 8500, and Catalyst 8000V. The new family of Cats...
Community Live- Smart Licensing Using Policy (Routing) – A Simplified Licensing Approach
(Live event - Tuesday, 18 May, 2021 at 9:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)
This event will have place on Tuesday 18th, May 2021 at 9:00 hrs PDT&nb...
Welcome to the overview guide that covers the latest in Cisco Networking and Data Center innovations and new product introductions. You'll find information on Intent Based Networking updates, special promotions and free trials, as well as exclusive upcom...