9200 in ROMmon

[VedrajHaurheeram8264]

Hello guys,

For a 9200 switch in ROMmon mode is there any script we can put on the switch/flash which loads the IOS automatically whenever the switch goes to ROMmon

[Leo Laohoo]

---

@VedrajHaurheeram8264 wrote:

For a 9200 switch in ROMmon mode is there any script we can put on the switch/flash which loads the IOS automatically whenever the switch goes to ROMmon

---

Yes, it is called a boot-variable string.

[marce1000]

 - Device should simply be configured with proper startup variables , including the image intended to run, what you want may not always be possible on severe device failure, for instance.

 M.

[balaji.bandi]

yes follow the below gude has steps : ( it is 9300 and works for 9200 too)

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-5/configuration_guide/sys_mgmt/b_165_sys_mgmt_9300_cg/troubleshooting_the_software_configuration.html#task_1099467