02-01-2023 11:02 AM
Hello
Any idea why stack power cable name does not show in output of show inventory?
Stack power cable used are two CAB-SPWR-30CM with a stack of two C9300-24P-A.
PS: Two STACK-T1-50CM are used to construct the stack. Those appear in output of show inventory same as power supplies..
Thank you
Solved! Go to Solution.
02-01-2023 12:09 PM
Hi,
Not sure if you can see the type of power cable being used. The "show stack-power detail" gives more details, but don't see the cable type in there.
HTH
02-01-2023 12:09 PM
Hi,
Not sure if you can see the type of power cable being used. The "show stack-power detail" gives more details, but don't see the cable type in there.
HTH
02-01-2023 11:39 PM
Thank you Reza.
02-01-2023 03:36 PM - edited 02-01-2023 03:38 PM
I have noticed that information i get when we do show information - as I remember
we can only see stack cable information :
#show switch stack-ports summary
some power related information :
#show env power all
#show stack-power neighbors
some good whitepaper for reference :
02-01-2023 11:39 PM
Thank you Balaji.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide