9300 SNMP Management

[avilt]

I have configured 9300 switch with management on MGMT port. No IP defined on vlan or physical interfaces.

I have configured snmp V3 and I am unable to monitor the switch using my NMS software. Is there any specific setting need to be defined to monitor on MGMT interface?

[Seb Rupik]

Hi there,

Have you appended all of your snmp-server statements with use-vrf Mgmt-vrf  ?

cheers,

Seb.

[avilt]

please provide the commands.

I have defined the following

SNMP-Server group TestSNMPv3Group v3 priv Read TestSNMPv3View Write TestSNMPv3View
SNMP-Server group TestSNMPv3Group v3 priv context vlan match prefix
SNMP-Server view TestSNMPv3View Internet included
SNMP-Server user TestSNMPv3User TestSNMPv3Group v3 auth SHA 1q2w3e4r priv AES 1q2w3e4r

[marce1000]

 - You may also have some manual snmp v3-based command line testing , before using the NMS.

 M.

[avilt]

I found similar problem on the following link, is it still not resolved on 9300?

https://community.cisco.com/t5/mpls/snmp-access-to-interface-in-vrf-mode/td-p/486197