cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5810
Views
0
Helpful
7
Replies

9300 stack license mismatch

raj-toor
Level 1
Level 1

Got 6 new 9300 switches and want to stack them but get licensing error. Difference i see in license is of DNA essentials. I did not activate any license, only upgraded IOS. There is no license right-to-use command to activate/deactivate..How can i make them equal..

 

 

sh license summ
Smart Licensing is ENABLED

Registration:
  Status: UNREGISTERED
  Export-Controlled Functionality: NOT ALLOWED

License Authorization:
  Status: EVAL MODE
  Evaluation Period Remaining: 89 days, 22 hours, 47 minutes, 43 seconds

License Usage:
  License                 Entitlement tag               Count Status
  -----------------------------------------------------------------------------
                          (C9300-48 Network Essen...)       2 EVAL MODE
                          (C9300-48 DNA Essentials)         2 EVAL MODE
From show version
------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
network-essentials Smart License network-essentials
dna-essentials Subscription Smart License dna-essentials
AIR License Level: AIR DNA Advantage
Next reload AIR license Level: AIR DNA Advantage

 

 

other switches that also need to go to stack

 

sh license su
Smart Licensing is ENABLED

Registration:
  Status: UNREGISTERED
  Export-Controlled Functionality: NOT ALLOWED

License Authorization:
  Status: EVAL MODE
  Evaluation Period Remaining: 89 days, 21 hours, 53 minutes, 17 seconds

License Usage:
  License                 Entitlement tag               Count Status
  -----------------------------------------------------------------------------
                          (C9300-48 Network Essen...)       4 EVAL MODE


from show version

------------------------------------------------------------------------------
Technology-package                                     Technology-package
Current                        Type                       Next reboot
------------------------------------------------------------------------------
network-essentials      Smart License                    network-essentials
None                    Subscription Smart License       None
AIR License Level: AIR DNA Advantage
Next reload AIR license Level: AIR DNA Advantage


 

 

 

 

 

 

 

 

 

 

 

 

7 Replies 7

balaji.bandi
Hall of Fame
Hall of Fame

the stack can not be mixed license level,  all should be the same model/ version / License - correct the one, not in the same kind of license.

 

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-6/configuration_guide/sys_mgmt/b_166_sys_mgmt_9300_cg/b_166_sys_mgmt_9300_cg_chapter_011.html#concept_g1h_gtj_n1b

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

@balaji.bandi I understand licenses cannot be mixed but as i said earlier there is no righ-to-use command available.

 

image.png

unstack them(make it stand alone), post show version from each device to understand the issue.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

I have another switch to install, and its not going in a stack. But it would replicate the same scenario as license right-to-use is not available in that too...working remotely

version 16.12
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
! Call-home is enabled by Smart-Licensing.
service call-home
platform punt-keepalive disable-kernel-core
!
hostname ###
!
!
vrf definition Mgmt-vrf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
logging buffered informational
logging console informational
logging monitor informational
enable secret 9 ########
!
aaa new-model
!
!
aaa authentication login default local group radius
aaa authorization exec default local group radius
!
!
!
!
!
!
aaa session-id common
boot system switch all flash:packages.conf
clock timezone PST -8 0
clock summer-time PDT recurring
switch 1 provision c9300-48p
!
!
!
!
call-home
 ! If contact email address in call-home is configured as sch-smart-licensing@cisco.com
 ! the email address configured in Cisco Smart License Portal will be used as contact email address to send SCH notifications.
 contact-email-addr sch-smart-licensing@cisco.com
 profile "CiscoTAC-1"
  active
  destination transport-method http
  no destination transport-method email
ip routing
!
!
!
!
login on-success log
!
!
!
!
!
no device-tracking logging theft
!
crypto pki trustpoint SLA-TrustPoint
 enrollment pkcs12
 revocation-check crl
!
crypto pki trustpoint TP-self-signed-3763326261
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-3763326261
 revocation-check none
 rsakeypair TP-self-signed-3763326261
!
!
crypto pki certificate chain SLA-TrustPoint
 certificate ca 01 nvram:CiscoLicensi#1CA.cer
crypto pki certificate chain TP-self-signed-3763326261
 certificate self-signed 01 nvram:IOS-Self-Sig#2.cer
!
!
!
diagnostic bootup level minimal
!
spanning-tree mode rapid-pvst
spanning-tree logging
spanning-tree extend system-id
archive
 log config
  logging enable
  notify syslog contenttype plaintext
  hidekeys
memory free low-watermark processor 134384
!
username abc privilege 15 secret 9 #####
!
redundancy
 mode sso
!
!
!
!
!
transceiver type all
 monitoring
!
!
class-map match-any system-cpp-police-ewlc-control
  description EWLC Control
class-map match-any system-cpp-police-topology-control
  description Topology control
class-map match-any system-cpp-police-sw-forward
  description Sw forwarding, L2 LVX data packets, LOGGING, Transit Traffic
class-map match-any system-cpp-default
  description EWLC Data, Inter FED Traffic
class-map match-any system-cpp-police-sys-data
  description Openflow, Exception, EGR Exception, NFL Sampled Data, RPF Failed
class-map match-any system-cpp-police-punt-webauth
  description Punt Webauth
class-map match-any system-cpp-police-l2lvx-control
  description L2 LVX control packets
class-map match-any system-cpp-police-forus
  description Forus Address resolution and Forus traffic
class-map match-any system-cpp-police-multicast-end-station
  description MCAST END STATION
class-map match-any system-cpp-police-high-rate-app
  description High Rate Applications
class-map match-any system-cpp-police-multicast
  description MCAST Data
class-map match-any system-cpp-police-l2-control
  description L2 control
class-map match-any system-cpp-police-dot1x-auth
  description DOT1X Auth
class-map match-any system-cpp-police-data
  description ICMP redirect, ICMP_GEN and BROADCAST
class-map match-any system-cpp-police-stackwise-virt-control
  description Stackwise Virtual OOB
class-map match-any non-client-nrt-class
class-map match-any system-cpp-police-routing-control
  description Routing control and Low Latency
class-map match-any system-cpp-police-protocol-snooping
  description Protocol snooping
class-map match-any system-cpp-police-dhcp-snooping
  description DHCP snooping
class-map match-any system-cpp-police-ios-routing
  description L2 control, Topology control, Routing control, Low Latency
class-map match-any system-cpp-police-system-critical
  description System Critical and Gold Pkt
class-map match-any system-cpp-police-ios-feature
  description ICMPGEN,BROADCAST,ICMP,L2LVXCntrl,ProtoSnoop,PuntWebauth,MCASTData,Transit,DOT1XAuth,Swfwd,LOGGING,L2LVXData,ForusTraffic,ForusARP,McastEndStn,Openflow,Exception,EGRExcption,NflSampled,RpfFailed
!
policy-map system-cpp-policy
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
 vrf forwarding Mgmt-vrf
 ip address dhcp
 negotiation auto
!
interface GigabitEthernet1/0/1
!
!
!
!
interface FortyGigabitEthernet1/1/1
!
interface FortyGigabitEthernet1/1/2
!
interface TwentyFiveGigE1/1/1
!
interface TwentyFiveGigE1/1/2
!
interface AppGigabitEthernet1/0/1
!
interface Vlan1
 no ip address
!
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
!
!
!
!
!
!
control-plane
 service-policy input system-cpp-policy
!
banner motd ^CCCC
Authorized access only!
^C
!
line con 0
 exec-timeout 30 0
 privilege level 15
 logging synchronous
 stopbits 1
line vty 0 4
 exec-timeout 30 0
 logging synchronous
 length 0
 transport input ssh
line vty 5 15
 exec-timeout 30 0
 logging synchronous
 transport input ssh
!
ntp broadcastdelay 4
ntp server 172.19.253.1
ntp server 172.19.253.2
!
!
!

 

I have the same issue? did you manage to solve it please?

Reza Sharifi
Hall of Fame
Hall of Fame

The command should be:

license right-to-use activate <whatever license you paid for>

HTH

Also, "show ver" should show you the current, installed license.

HTH

Review Cisco Networking for a $25 gift card