hello we have ACS server in our network which is currently used for wireless controllers we need to add network switches to authenticate from ACS server.
I have prepaired some config but I am not sure if thats right I have two set of config do tell if any of the 2 is correct or any changes are required .
1)
aaa group server tacacs+ AAAGROUP_TACACS
server-private 10.1.2.1 key 0 abcd
server-private 10.1.2.2 key 0 abcd
ip tacacs source-interface Vlan2
2)
aaa new-model
aaa authentication login WestAuthList group radius local
radius-server host 10.1.2.1 auth-port 1645 acct-port 1646 key abcd
radius-server host 10.1.2.2 auth-port 1645 acct-port 1646 key abcd
ip radius source-interface Vlan2
line vty 0 4
login authentication WestAuthList
transport input ssh
thanks for help
