11-12-2010 04:36 AM - edited 03-06-2019 02:01 PM
Dear all,
I have the following port configuration
interface FastEthernet1/0/6
switchport access vlan 192
switchport mode access
switchport voice vlan 160
no logging event link-status
srr-queue bandwidth share 10 10 60 20
priority-queue out
authentication control-direction in
authentication event no-response action authorize vlan 180
authentication host-mode multi-domain
authentication port-control auto
authentication periodic
authentication violation protect
mab
mls qos trust cos
no snmp trap link-status
snmp ifindex persist
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 1
dot1x timeout tx-period 1
dot1x timeout supp-timeout 10
dot1x max-req 1
spanning-tree portfast
but somehow the line "switchport access vlan 192" changen to "switchport access vlan 0".
does anybody know why this happens? it needs to stay on 192 for Wake on Lan.
regards,
Gerard
11-15-2010 11:39 AM
Gerard,
Please let me know the exact platform and IOS version details.
- Yogesh
11-16-2010 07:47 AM
Dear Yogesh,
I think this wil answer your question. Thanks
Cisco IOS Software, C3750 Software (C3750-IPBASE-M), Version 12.2(50)SE3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 22-Jul-09 06:19 by prod_rel_team
Image text-base: 0x01000000, data-base: 0x02800000
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)
Regards,
Gerard
11-16-2010 08:06 AM
Hello Gerard,
vlan 0 is used internally, this is the reason why Yogesh asked you to provide information on switch model and IOS image running on it, probably to perfrom a bug search
Hope to help
Giuseppe
11-16-2010 03:32 PM
Hi Gerard,
Before this config, was the port by chance configured with "switchport access vlan dynamic"?
Chad
11-17-2010 12:14 AM
Hi Chad,
we are moving from vmps to 802.1x.
so the answer is yes. it was dynamic
is it a known issue?
regards,
Gerard
ps. it looks like alles the "switchport acces vlan" lines change to another vlan
11-17-2010 09:47 AM
Hi Gerard,
Yes it is. I'll update this again with more information as to bug ID
here in a bit.
Chad
11-17-2010 09:55 AM
Hi Gerard,
Actually the bug I was looking at should already be fixed in the code
you are running. I was looking at your bootldr image, not your IOS.
Can you open a new TAC case for this? We need to look at this further.
Thanks
Chad
11-19-2010 12:07 AM
Dear Chad,
thank you for your reply, just to be on the safe side I will upgrade my ios to a newer version.If the problem persists, my supplier will make a TAC case. I have no rights to do this.
I'll keep you informed.
Regards,
Gerard
11-25-2010 01:18 AM
I've updated to version 12.2(55)SE
it seems it has been solved. although I've just installed it yesterday. I'll update the information in about a week
12-13-2010 01:25 AM
after a couple of weeks, everything seems to work normale. so the update to 12.2.55 seems to have solved it. 12.2.50se4 didn't solve it.
thanks again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide