ACL capture on Nexus 7K

[imran.moulvi]

Hi ,

I am trying to setup an ACL capture on Nexus 7K as we need to have more than 2 span sessions.

The capture is working however the wireshark traces only show the L2 information and not the L3 header.

Has anybody come across this issue and has any idea.

I am attaching the config that I am doing and also the wireshark pcap file

Any help would be appreciated.

Regards,

Imran.

[nkarpysh]

HI Imran,

I see that protocol is unknown in those packet - 0xf000. Can you please try some other L3 traffic through this VLAn and see if that also decoded with unknown protocol type instead of 0x8000 for ip.

Nik

[imran.moulvi]

Hi Nikolay,

I've tried http/telnet traffic but it yields the same results. I am not sure whats going on.

[nkarpysh]

Hi,

Can you pls paste "show ver", "show ip access-lists capture session 1", "show running-config aclmgr" and  "show int vlan3".

Nik