12-18-2016 04:44 AM - edited 03-08-2019 08:37 AM
my PE ip is 192.168.0.1, vrf is : TEST
my CE is 192.168.0.2 , in my CE, I run sh ip bgp nei 192.168.0.1 advertised-routes it shows the routes
but when i go to PE, I type: sh ip bgp nei 192.168.0.2 advertised-routes, it shows no such neighbor and address family, so from PE, do I need to change the command to see the routes advertised form PE? thanks
12-18-2016 12:42 PM
Hi Peter,
Because the interface is associated with a VRF on the PE, you would require something like;
"show ip bgp vpnv4 vrf TEST neighbor 192.168.0.1 advertised"
12-19-2016 02:58 AM
thanks, but show ip bgp vpnv4 vrf TEST neighbor 192.168.0.1 advertised shows 20 over routes, and sh ip bgp al summ state column only 4 routes, so which one should i refered to?
12-19-2016 08:47 AM
Hello
The latter one shows a summary routes - the former will show prefixes that are advertised to that neighbour within the vrf.
So I would say this would be the one
res
paul
12-19-2016 02:19 PM
Hi,
"show ip bgp vpnv4 vrf TEST neighbor 192.168.0.1 advertised"
Based on your post, it should be.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide