advertised route from PE didn't work

[petercinvest]

my PE ip is 192.168.0.1, vrf is : TEST

my CE is 192.168.0.2 , in my CE, I run sh ip bgp nei 192.168.0.1 advertised-routes it shows the routes

but when i go to PE, I type: sh ip bgp nei 192.168.0.2 advertised-routes, it shows no such neighbor and address family, so from PE, do I need to change the command to see the routes advertised form PE? thanks

[mattjones03]

Hi Peter,

Because the interface is associated with a VRF on the PE, you would require something like;

"show ip bgp vpnv4 vrf TEST neighbor 192.168.0.1 advertised"

[petercinvest]

thanks, but show ip bgp vpnv4 vrf TEST neighbor 192.168.0.1 advertised shows 20 over routes, and sh ip bgp al summ state column only 4 routes, so which one should i  refered to?

[paul driver]

Hello

The latter one shows a summary routes - the former will show prefixes that are advertised to that neighbour within the vrf.

So I would say this would be the one

res

paul

[mattjones03]

Hi,

"show ip bgp vpnv4 vrf TEST neighbor 192.168.0.1 advertised"

Based on your post, it should be.