02-21-2013 08:04 AM - edited 03-07-2019 11:51 AM
We have 3 VLAN in our cisco 3750G switch. VLAN 1 10.1.0.0/24 for domain network, VLAN 2 10.2.0.0/24 for student and VLAN 3 10.3.0.0/24 for public. We have one printer 10.3.0.206 in the VLAN 3 and want to allow student server 10.2.0.253 in the VLAN 2 to access the printer. How can we configure access-list? Here is current configuration.
ip access-list extended publicaccess
permit icmp any any
permit ip any host 10.2.0.253
permit tcp any any established log
deny ip 10.3.0.0 0.0.0.255 10.1.0.0 0.0.0.255
deny ip 10.3.0.0 0.0.0.255 10.2.0.0 0.0.0.255
Solved! Go to Solution.
03-01-2013 03:38 AM
you need to add this configuration to the vlan 2 interface.
03-01-2013 02:43 AM
Hello,
Where is this ACL placed, i.e. on which interface and in which direction? Thank you!
Best regards,
Peter
03-01-2013 03:38 AM
you need to add this configuration to the vlan 2 interface.
03-01-2013 04:41 AM
Hi,
you need to add this configuration to the vlan 2 interface
... or to the Vlan3 interface There are more valid options, we need to know more.
Best regards,
Peter
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide