05-09-2016 04:29 AM - edited 03-08-2019 05:39 AM
Hi,
My switch is generating logs stating the same mac in different ways.
Do you know why?
May 6 17:24:54 2016 Site1 %%10ARP/5/ARP_DUPLICATE_IPADDR_DETECT(l): Detected an IP address conflict. The device with MAC address 001b-4f4f-26ff connected to Bridge-Aggregation1 in VLAN 1 and the device with MAC address 001b-4f4f-26ff connected to Bridge-Aggregation2 in VLAN 1 are using the same IP address 192.168.123.229
Thank you
05-09-2016 06:44 AM
Hi
whats the device connected for that mac is it wireless ?
whats the bridge aggregation1 and 2 , is the switch somehow leaning this through 2 locations on the switch to see this conflict ? whats the physical setup look like
05-09-2016 10:43 AM
Mark,
The mac (001b-4f4f-26ff) is an IP phone.
Bridge-Aggregation 1 have connected a switch and bridge-Aggregation other connected switch.
Yesterday I updated the switch software. Does this log is related to software version?
Since yesterday did not have this log.
05-09-2016 05:22 PM
It looked like the bridge aggregation didn't match between the 2 switches; so packets were being received "unexpectedly", which normally isn't a good thing. Glad to see the switches now appear to agree on channel operation (or have shut down the offending path).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide