Fex not linking to 5000

[opnineopnine]

Hi all,

I have my Nexus 5672up and my Fex 2348UPQ, and when I do my basic fex config and I do a show int brief the links are always down.

In the logs I get this output

command failed: port not compatible [port mode]
Nx5k(config-if-range)# 2016 May  9 20:39:15
Nx5k %ETH_PORT_CHANNEL-3-COMPAT_CHECK_FAILURE: port mode is not compatible
!
 channel-group 100
command failed: port not compatible [Members should have same fex config]
Nx5k(config-if-range)# 2016 May  9 20:40:55
Nx5k %ETH_PORT_CHANNEL-3-COMPAT_CHECK_FAILURE: Members should have same fex config is not compatible
!

I tryed with the 10gb sfp and wit the fet-10g also and have the same issue.

thanks.!

1322

[Reza Sharifi]

Hi,

Are the physical ports up?

What is port number you are trying to add to the Po?

What is the output of "sh ver"?

[opnineopnine]

Hello Reza,

Im using the ports 1/1- 1/2 but like I said, with the 10gb sfp and with the fet-10g is not working, all the ports are up.

The version is 7.0.1.

What I found is that with the qsfp I get link between the 5k and the 2k.

Thanks.