cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4223
Views
0
Helpful
19
Replies

ASA 5505 to sg300 connection

Aalto_SysAdmin
Level 1
Level 1

I have a Cisco ASA 5505 with security plus license. I have been tasked with setting up a sg-300 in layer 3 mode to handle the inter-vlan routing instead of the asa. I'm new to cisco, I cut my teeth on Brocade and foundry and the ASA is a beast on its on. So far I have inter-vlan routing working on the switch but need advice on the asa to sg300 connection. Currently I have the asa with interfaces(inside,outside,) looking to dmz later a pass through to the sg300. My question is how should the connection to asa to sg300 be handled. 

 

vlan1 192.168.1.0/24

vlan2 172.16.2.0/24

vlan3  172.16.3.0/24

vlan4   172.16.4.0/24

 

19 Replies 19