10-04-2012 08:35 AM - edited 03-07-2019 09:16 AM
Dear All,
i need help in the following topic:
we converted from DSL to VDSL. First we used the telekom speedport w921 as model only connected to a
CISCO ASA 5505 router. Fine, but unstable (one time a week was a power reset nenessary).
Then we exchanged the speedport against an ALLNET ALL126AS2, because telekom told us to do so.
BUT: VLAN TAGGING (7) SEEMS NOT TO BE SUPPORTED BY CISCO WITH MY LICENCES ?
ANY IDEA ?
ralph kessler
PINGUIN Ing.Büro
06-06-2013 08:05 AM
Hi Ralph,
Did you solved that problem?
regards
11-04-2013 09:57 AM
Hi Ralph and atacan2006,
some update here?
Would be nice to get a working config for ASA5505 with ALLNET ALL126AS2.
Thanks
11-05-2013 12:54 PM
Hi,
I just want to let you know that it's running fine now.
Here is a short overview:
Hardware
Cisco ASA 5505 Security Plus
Allnet all126as2 VDSL Modem connected to asa port ethernet0/6
Config for the Interface and the VLAN:
interface Ethernet0/6
description --- WAN to VDSL Modem ---
switchport trunk allowed vlan 7
switchport mode trunk
interface Vlan7
nameif outside
security-level 0
pppoe client vpdn group dailin
ip address pppoe setroute
The rest was normal PPPoE setup and NAT.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide