Switching

Hello Everyone,For those of you who have implemented the recently released VSS on the 4500/4500x platforms, how is it running?  Stable?I have a pair of 4500x's staged and things seem to work fine.  At least in the staging/lab area.I'll be installing ...

I have Cisco 2921 with 3 interfaces.G0/0 connects to internet.G0/2 has various client vlans (on subinterfaces only) which access internet. G0/1 has my proxy cache via WCCP.I frequently get complaints when people report that there internet connection ...

       Dear          Sorry for this

I'm using packet tracer to simulate a LAN to WAN environment. laptop>switch>switch>router>routerI cant ping frrom the laptop to the second (last) router. The last router I'm simulating as the ISP.I can ping from the laptop to the inside interface (wh...

HiPlease let me know what is port forwarding. When do we use this. Static nat and port forwarding is same or is there any  diffrence.Whether only routers will support this features or even switch also supports. Which series of routers and switches wi...

Hi Everyone,I have an issue with Netflow lite when testing it on a 2960X.It seems that no flows are send to my collector.Below the relevant config and som show outputs.Can someone see what I did wrong or guid me to find a solution?Thanks!flow record ...

Hello, if i upgrade or downgrade the ios of my chassis, will i loose the fact that it is in ipbase / Entreprise version?Tx,B

A Catalyst 3850-24P runs IOS-XE 3.2.2SE is reporting what seems like excessively high rates of CPU utilitization.There is no debugging enabled at this time.The busiest process seems to be 'fed'k390-cal-r-4a-0#show proc cpu sorted Core 0: CPU utilizat...

Hello,I am trying to setup a rate limit on fex ports (modl is N2K-C2248TP-1GE ) of a 5548UP (non L3)  -  Software version is : version 6.0(2)N2(2)I have tried the following setup without success  :ip access-list ACL_CUST  10 permit ip 10.100.100.1/32...

Hi,I have a customer who is having 3750X Switch with IP Base Image.They are planning to add a new switch and these two switches will be stacked.Could you please recommend a cost effective switch that can be stacked with existing 3750X Switch(IP Base ...

while configuring GRE on 6509 we are not able to enter below command on the interface can you please advise on 6509 image 15.1                    6509(config-if)# ip mtu 14006509(config-if)# ip tcp adjust-mss 1360thanks for help

Guys ,I'm trying to understand what may be happening with the module, because there is no evidence in the show logg on this failure, I tried in all possible links in the forum, but were not useful, follows some logs..#show version Cisco IOS Software,...