01-22-2019 06:48 AM - edited 01-22-2019 06:54 AM
If this has already been answered, please point me to it and forgive me...
Trying to upgrade a new ASR 1001-X, from universal9.16.05.01b to universal9.16.06.05 from Usb0:
install add file usb0:asr1001x-universalk9.16.06.05.SPA.bin but I get the following error.
FAILED: install_add /vol/usb0/asr1001x-universalk9.16.06.05.SPA.bin: /vol/usb0/asr1001x-universalk9.16.06.05.SPA.bin's version Invalid does not match with 16.5.1.0.1432
any guidance is greatly appreciated!!
Solved! Go to Solution.
01-22-2019 07:49 AM
01-22-2019 07:42 AM - edited 01-22-2019 07:43 AM
Hi
copy the file off the USB to the boot flash in the ASR then boot from bootflash , that should work its how i do it on mine
copy usb:..... bootflash:
Then
#sh run | i boot
boot-start-marker
boot system bootflash:asr1001x-universalk9.03.16.07b.S.155-3.S7b-ext.SPA.bin
boot system bootflash:asr1001x-universalk9.03.16.05a.S.155-3.S5a-ext.SPA.bin
boot system bootflash:asr1001x-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin
boot system bootflash:asr1001x-universalk9.03.16.03.S.155-3.S3-ext.SPA.bin
boot-end-marker
no ip bootp server
#sho bootv
BOOT variable = bootflash:asr1001x-universalk9.03.16.07b.S.155-3.S7b-ext.SPA.bin,12;bootflash:asr1001x-universalk9.03.16.05a.S.155-3.S5a-ext.SPA.bin,12;bootflash:asr1001x-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin,12;bootflash:asr1001x-universalk9.03.16.03.S.155-3.S3-ext.SPA.bin,12;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102
01-22-2019 07:46 AM
boot-start-marker
boot system bootflash:asr1001x-universalk9.16.06.05.SPA.bin
boot-end-marker
no ip bootp server
wr mem
then just reboot/reload the ASR ?
01-22-2019 07:49 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide