cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1370
Views
5
Helpful
3
Replies

ASR-920-12CZ-D router port hang issue after upgrade asr920-universalk9_npe.V169_4_SR688058565_4.SPA.bin

soheljujara
Level 1
Level 1

Hello Team,

 

The inbuild electrical port can not came up after upgrade the new polaris IOS (asr920-universalk9_npe.V169_4_SR688058565_4.SPA.bin), but when insert Electrical SFP and connect the laptop port are came up..Please guide me is there any bug bcz..there is same issue in our 5-6 device...

3 Replies 3

marce1000
VIP
VIP

 

 - Check the logs when this happens and or in your  case , perhaps, just after boot. Check if you can find any additional info's

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Hey,

Now the port has up, after shut no-shut commmand.

but there is common issue, every time if we have connect new equipment on the port,   without shut no-shut its not came up.

and we did not found any logs in router.

 

Regards

Sam

 

 - Make sure this issue is not related to behavior of a particular equipment. And or try another device (type) - check if the problem remains in place or not.

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Review Cisco Networking for a $25 gift card