on show boot-command i found an entry called "auto upgrade path". what stand it for?
BOOT path-list : flash:/ies-lanbase-mz.122-55.SE5/ies-lanbase-mz.122-55.SE5.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : yes
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
buffer size: 65536
Timeout for Config
Download: 0 seconds
via DHCP: disabled (next boot: disabled)
i would like to bring a new IOS-image to this switch while auto-setup-procedure. Auto upgrade is already set to yes.
Does anybody know how to use this feature?
EEM does not work correct because it's limited by ies-lanbase-version of IOS.
thanks for good ideas