11-30-2020 12:39 AM - edited 12-01-2020 01:47 AM
I have a new Cisco RV340 Router
which is used as a load balancing router connects 2 WAN s and 4 LAN s
i have 4 LAN each one is connected to four ports of RV340 through the same switch Cisco catalyst 4503
in Cisco RV340 configurations are
VLAN 1 : 192.168.1.1/24 Cisco RV340
VLAN 2: 192.168.10.1/24
VLAN 3: 192.168.20.1/24
VLAN 4: 192.168.30.1/24
when I connect more than one LAN port the packets are dropped
in both ports i make both the ports in switch to trunk port it still drops packets due to mac flapping
Any one help me to provide internet for all networks
11-30-2020 03:12 AM
- Do you have any examples for mac flapping from the logs ?
M.
11-30-2020 09:53 PM
Host 7C:31:0E:EH:64:2A in vlan 1 is flapping between port Gi1/1 and port Gi1/3
this messge on cisco catalyst 4305 s console while ping to both from both vlans
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide