Bandwidth limit in Cisco Switch C2960X

[Zayar Win]

Dear Sir,

         How Can I make bandwidth limit on Cisco C2960E Switch.

(C2960X-UNIVERSALK9-M), Version 15.0(2)EX5

I would like to quote on that port Download - 6 Mbps and Upload - 3 Mbps 

Thanks

ZYW

[zdesignstudio]

Check the link below for more details:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/15.0_2_se/configuration/guide/swqos.html#wp1253412

You can't manage the ingress traffic because after the packet reach the interface it was processed by switch. Anyway it doesn't make sense.

Please rate useful posts and mark answers as correct if applicable.

[Joseph W. Doherty]

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

I think the 2960's QoS is similar to a 3750s.  If so, you might be able to police port ingress and "shape" port egress.