Basic network configuration

[beginner1]

Hello,

I've configured the below network using Class C addresses. Can someone help me in configuring the same using any Class A and Class B address?

Ps- I'm very new to using Cisco Packet tracer.

I've attached the file along with configuration details below.

[Georg Pauwen]

Hello,

I think I remember you asking this question before ? Either way, Class A and Class B can either be public or private space addresses...which ones do you need ?

[beginner1]

Hello, 

I'm not very sure about the difference between Public and private space addresses.

I need something similar to the class C configuration that I've already done. 

[luis_cordova · Accepted solution]

Hi @beginner1,

In simple words:

The classes of private networks are:

A: 10.0.0.0-10.255.255.255 /8

B: 172.16.0.0-172.31.255.255 /16

C: 192.168.0.0-192.168.0.255 /24

Therefore, if you only want to change your class C networks, just change the first two octets of the all yours IP.

Example:

192.168.1.1/24 => 172.16.1.1/16

or

192.168.1.1/24 => 10.0.1.1/8

Regards

[MUHAMMAD TAYYAB MUNIR]

Hi ,

its really simple just read the available privates IPs blocks and configure from any class A,B or C.

https://en.wikipedia.org/wiki/Private_network

BR

Tayyab

[MUHAMMAD TAYYAB MUNIR]

Hi,

check the below link for the available block from class A and configure.

https://en.wikipedia.org/wiki/Private_network

BR

Tayyab