I have a Nexus 3048 which i have configured basic ebgp n ibgp on. But when i do sh ip bgp summary, command i dont see any output display, all i see is a single line.....BGP summary information for VRF default, address family IPV4 unicast. Could anyone advice on why i am having this?
This is the bgp configuration i have.
Router bgp 65542
Router-id 10.20.0.253
Address-family ipv4 unicast
Network 10.20.0.0/16
Neighbor 10.20.0.254 remote-as 65544
Sent from Cisco Technical Support Android App
