08-16-2019 11:12 AM
An RFQ for a switch that requires "Power cord C13 to C14, PDU style 12 AMP, 6.5 Feet (2m)".
I have decided that one of these two switches meet my criteria: C9300-24T-A or C9300-24P-E.
How do I select that power cable for those switches?
08-16-2019 12:25 PM
In depends on the country you are ordering it for. For example; in the US these switches come with an AC power cord (usually C14-C15) and not C13-C14. If you need C13-C14 you have to specifically order it as it does not come with the switch.
What are you trying to do?
What type of power/connector you have?
HTH
08-16-2019 01:01 PM
08-16-2019 01:26 PM - edited 08-16-2019 01:27 PM
Ok, I see. That is c13-c14. If you are using this on the 9300 series you actually need c14-c15 because the back of the power supply has a cut and only c14-c15 fits in there. See link for an example.
HTH
08-16-2019 01:39 PM
Reza Sharifi thank you immensely for the insight, I believe I found what I am looking for the product: "CAB-C15-CBN=".
08-16-2019 03:25 PM - edited 08-16-2019 03:26 PM
That is correct.
Please rate all helpful posts and mark the post as resolved so others can benefit from it.
Good Luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide