Booted image on rp 1 does not exist

[cyborgltd]

This happens when entering the command: software install file usbflash0:cat3k_caa-universalk9.16.03.03.SPA.bin new force on-reboot

Boot variable screen shot is attached

Directory of flash: is attached

[Reza Sharifi]

First load the IOS into flash than try this command:

software install file flash:<name of the ios>

HTH

[cyborgltd]

Same result. See attachment.

Thanks for the input though.

[cyborgltd]

Issue appears to be that the booted path is : version3.0.7 instead of the packages.conf even though the boot variable was set to flash: is still looks at the pervious booted path.

I found a copy on flash-2: and copied it back to flash:

Everything works now. 

Well except I run out of flash free space now. :-(

[Prem]

1. Run SW002#more packages.conf command and delete all .pkg files associated along with packages.conf file
2. Then, run command "software expand" not install in this case. Example.

SW002#software expand file flash:cat3k_caa-universalk9.16.03.06.SPA.bin [or your required bundle file]

I would suggest you to copy bundle file (.bin) from usbflash0: to switch flash: before proceeding.