10-28-2021 09:23 AM
Hi All,
need to replace juniper EX3400 48-port 10/100/1000BASE-T, 4, x 1/10GbE SFP/SFP+, 2 x 40GbE QSFP+
please suggest
Solved! Go to Solution.
10-28-2021 10:42 AM
Hi,
On the 9300 usually, you have one slot for uplinks. So, you can use 2, 40Gig, or 8 10Gig but not a combination of both. It is either-or.
HTH
10-28-2021 09:41 AM
Hi,
Not sure what you are asking? Did you already purchase the 9300, or are planning on purchasing them?
If yes, what model?
What do these switches need to connect to? Do you need to uplink these switches via fiber, copper?
HTH
10-28-2021 09:49 AM
Hi Reza,
looking for 48 port 1/10 gig copper with 4x10 gig and 2x40 gig uplinks
can we use combination of uplink modules to achieve this with a 48 port Mgig switch
Regards,
10-28-2021 09:50 AM
Hi Reza,
looking for 48 port 1/10 gig copper with 4x10 gig and 2x40 gig uplinks
can we use combination of uplink modules to achieve this with a 48 port mGig switch
Regards,
10-28-2021 09:58 AM - edited 10-28-2021 01:58 PM
if the same capacity you can use example
1 X 10G Copper
1 X 10G Fibre
Uplink link module only 1 choice
10-28-2021 10:42 AM
Hi,
On the 9300 usually, you have one slot for uplinks. So, you can use 2, 40Gig, or 8 10Gig but not a combination of both. It is either-or.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide