08-13-2013 07:25 AM - edited 03-07-2019 02:53 PM
I know Terminators are used to avoid signal bounce in the BUS topology but I want to understand how the signal bounce can happen in Bus topology.
Please help me to understand clearly with technical notes.. you can post on Electronics terms also to understand
Regards,
Sakthivel M
08-13-2013 09:01 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
My understanding, the signal bounces (or reflects) off the end of the physical "wire". A terminator dampens the reflection.
08-13-2013 10:01 PM
Hi Joseph,
I Understand signal Bounces at the end of the wire, But why it bounces... I'm not able to get the answer for this anywhere.
08-14-2013 03:05 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Physics. The signal wave "sees" the end of the wire as a "wall" and will reflect off it
Drop a coin it a pot of water and you'll see the waves reflect off the pot's sides. Same principle, I believe.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide