02-23-2024 11:04 PM
Hi We have purchased the switch Model C1000-48P-4G-L, herein first connected 24 cameras (any combination) only working. The camera PoE budjet os only 4.8W (Max). Please support to configure all 48 Ports usable for PoE.
02-23-2024 11:50 PM
@SriniSubuu can you share the power utilization of switch? use #sh power inline
or #show switch power inline.
also share the #sh version
02-24-2024 12:06 AM
in addition to the already asked the information :
C1000-48P-4G-L |
48x 10/100/1000 Ethernet PoE+ and 370W PoE budget ports, 4x 1G SFP uplinks |
it is very important for us to know what PSU installed on the switch.
When power policing is enabled, the device determines one of the these values as the cutoff power on the PoE port in this order:
Manually when you set the user-defined power level that limits the power allowed on the port by using the power inline auto max max-wattage or the power inline static max max-wattage interface configuration command
Automatically when the device sets the power usage of the device by using CDP power negotiation.
Use the first or second method in the previous list to manually configure the cutoff-power value by entering the power inline consumption default wattage or the power inline [auto | static max] max-wattage command.
02-24-2024 04:15 AM
Check if you getting the full PoE budget and where is allocated through show switch power inline and/or if you are not disabling interfaces that need more PoE than allocated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide