11-24-2012 10:33 PM - edited 03-07-2019 10:13 AM
Hi,
I have C3560 switches in my work environment. I want configure ssh on that switch but the IOS what they have 'c3560e-universal-mz.122-58.SE2' not support. As per advised I was triying to upgrade 'c3560e-universalk9-mz.122-58.SE2" for all my access switches.
I successfully upgraded for two switches.
I have two problems now
01. I upgraded the IOS successfully one Switch but the Poe is not working. What is the reason ?
02. After upgrade the IOS, the out put is as follows
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 30 WS-C3560E-24PD 12.2(35)SE5 C3560E-UNIVERSAL-M
Cisco#sh boot sys
c3560e-universalk9-mz.122-58.SE2.bin
Cisco#sh flash:
Directory of flash:/
2 -rwx 856 Mar 1 1993 03:00:54 +03:00 vlan.dat
3 -rwx 2917 Nov 25 2012 09:00:26 +03:00 dhcpbind
4 -rwx 4120 Nov 21 2012 15:30:08 +03:00 multiple-fs
5 drwx 512 Mar 1 1993 03:23:29 +03:00 c3560e-universal-mz.122-35.SE5
463 -rwx 19540 Nov 21 2012 15:30:08 +03:00 config.text
464 -rwx 17940526 Nov 21 2012 15:27:31 +03:00 c3560e-universalk9-mz.122-58.SE2.bin
465 -rwx 115 Nov 21 2012 15:30:08 +03:00 private-config.text
The system boot IOS showing upgraded IOS but in the sh ver showing old IOS.
Please advise how to resolve this?
Thanks and Regards,
Shahul Hameed.
11-25-2012 07:32 AM
Hi,
Does your boot statement look like this:
boot system flash:c3560e-universalk9-mz.122-58.SE2.bin
Can you post "sh run | inc boot system"
HTH
11-25-2012 09:16 PM
Hi Reza
The boot system flash showing empty. But showing boot sysytem file.
Please find teh output.
cisco#sh run | i bootsysytem
cisco#sh run | b bootsysytem
cisco#sh boo sys
cisco#sh boo sys
c3560e-universalk9-mz.122-58.SE2.bin
11-25-2012 09:26 PM
Try this command: delete /f /r flash:c3560e-universal-mz.122-35.SE5
Reboot.
11-26-2012 05:22 AM
or you can also boot with below commands -
1. use command for OLD IOS which will unboot an OLD IOS
no boot system flash:c3560e-universal-mz.122-35.SE5.bin ==============> OLD IOS
2. then use command for new IOS, also for OLD IOS in case new IOS face any error then it will failover to OLD one
boot systmem flash:c3560e-universalk9-mz.122-58.SE2.bin ==============> NEW IOS
boot system flash:c3560e-universal-mz.122-35.SE5.bin ===============> OLD IOS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide